22 S29AL016D
s29al016d_00_a2 12月 17, 2004
初步的
command 定义
writing 明确的 地址 和 数据 commands 或者 sequences 在 这 command
寄存器 initiates 设备 行动.
Table9定义 这 有效的 寄存器 command
sequences. writing
incorrect
地址 和 数据 值
或者 writing 它们 在 这
improper sequence
resets 这 设备 至 读 排列 数据.
所有 地址 是 latched 在 这 下落 边缘 的 we# 或者 ce#, whichever 发生
后来的. 所有 数据 是 latched 在 这 rising 边缘 的 we# 或者 ce#, whichever 发生
第一. 谈及 至 这 适合的 定时 图解 在 这
交流 特性部分.
读 排列 数据
这 设备 是 automatically 设置 至 读 排列 数据 之后 设备 电源-向上. 非
commands 是 必需的 至 retrieve 数据. 这 设备 是 也 准备好 至 读 排列
数据 之后 完成 一个 embedded 程序 或者 embedded 擦掉 algorithm.
之后 这 设备 accepts 一个 擦掉 suspend command, 这 设备 enters 这 擦掉
suspend 模式. 这 系统 能 读 排列 数据 使用 这 标准 读 timings,
除了 那 如果 它 读 在 一个 地址 在里面 擦掉-suspended sectors, 这 设备
输出 状态 数据. 之后 完成 一个 程序编制 运作 在 这 擦掉 sus
-
pend 模式, 这 系统 将 once 又一次 读 排列 数据 和 这 一样 例外.
看
擦掉 suspend/擦掉 重新开始 commands为 更多 信息 在 这个 模式.
这 系统
必须
公布 这 重置 command 至 re-使能 这 设备 为 读
排列 数据 如果 dq5 变得 高, 或者 当 在 这 autoselect 模式. 看 这
重置 com-
mand部分, next.
看 也(所需的)东西 为 读 排列 数据在 这设备 总线 行动秒-
tion 为 更多 信息. 这读 行动表格 提供 这 读
参数, 和图示 13显示 这 定时 图解.
重置 command
writing 这 重置 command 至 这 设备 resets 这 设备 至 读 排列 数据.
地址 位 是 don’t 小心 为 这个 command.
这 重置 command 将 是 写 在 这 sequence 循环 在 一个 擦掉
command sequence 在之前 erasing begins. 这个 resets 这 设备 至 读 排列
数据. once erasure begins, 不管怎样, 这 设备 ignores 重置 commands 直到 这
运作 是 完全.
这 重置 command 将 是 写 在 这 sequence 循环 在 一个 程序
command sequence 在之前 程序编制 begins. 这个 resets 这 设备 至 读
-
ing 排列 数据 (也 应用 至 程序编制 在 擦掉 suspend 模式). once
程序编制 begins, 不管怎样, 这 设备 ignores 重置 commands 直到 这 运算
-
限定 是 完全.
这 重置 command 将 是 写 在 这 sequence 循环 在 一个 autoselect
command sequence. once 在 这 autoselect 模式, 这 重置 command
必须
是
写 至 返回 至 读 排列 数据 (也 应用 至 autoselect 在 擦掉
suspend).
如果 dq5 变得 高 在 一个 程序 或者 擦掉 运作, writing 这 重置 command
returns 这 设备 至 读 排列 数据 (也 应用 在 擦掉 suspend).