Si2400
30 rev. 0.95
modem 结果 代号 和 call progress
表格 18 显示 这 modem 结果 代号 这个 能 是
使用 在 call progress monitoring. 所有 结果 代号 是
仅有的 一个 单独的 character 在 顺序 至 速 向上 这
交流 和 使容易 处理 用 这 host.
自动 call progress 发现
这 si2400 有 这 能力 至 发现 dial, busy 和
ringback tones automatically. 这 下列的 是 一个
描述 的 这 algorithms 那 有 被
执行 为 这些 三 tones.
1.
dial 声调
. 这 dial 声调 探测器 looks 为 一个 dial 声调 之后
going 止 hook 和 在之前 dialing 是 initiated. 这个 能 是
绕过 用 enabling blind dialing (设置 bd (s07.6) =1).
之后 going 止 hook, 这 si2400 waits 这 号码 的
秒 在 dw (s01) 在之前 searching 为 这 dial 声调.
在 顺序 为 一个 dial 声调 至 是 发现, 它 必须 是 呈现
为 这 长度 的 时间 编写程序 在 dtt (sic). once 这
dial 声调 是 发现, dialing 将 commence. 如果 一个 dial 声调
是 不 发现 为 这 时间 编写程序 在 cw (s02), 这
si2400 将 hangup 和 echo 一个 “n” 至 这 用户.
2.
busy / ringback 声调
. 之后 dialing 有 完成, 这
si2400 monitors 为 busy/ringback 和 modem answer
tones. 这 busy 和 ringback 声调 detectors 两个都 使用 这
call progress 活力 探测器.
si2400 寄存器 settings 为 global cadences 为 busy 和
ringback tones 是 列表 在 表格 17, 包含 这 default
settings 为 寄存器 bton (s16), btof (s17), btod
(s18), rton (s19), rtof (s1a), 和 rtod (s1b).
手工的 call progress 发现
因为 其它 call progress tones 在之外 那些
描述 在之上 将 exist, 这 si2400 支持 手工的
call progress. 这个 需要 这 host 至 读 和 写
这 低-水平的 dsp 寄存器 和 将 需要 realtime
控制 用 这 host. 手工的 call progress 将 是
必需的 为 发现 的 应用-明确的 ringback,
dial 声调, 和 busy 信号.
便条:
手工的 call progress 需要 dsp 低-水平的 控制.
这 部分 在 dsp 低 水平的 控制 应当 是 读
在之前 attempting 手工的 call progress 发现.
至 使用 这个 模式, 这 自动 modem responses
应当 是 无能 用 设置 mrcd (s14.7) = 1. 这
call progress biquad 过滤 能 是 编写程序 至 有
一个 custom desired 频率 回馈 和 发现
水平的 (作 描述 在 “modem 结果 代号 和 call
progress” ).
四 专心致志的 用户-定义 频率 detectors 能
是 编写程序 至 搜索 为 单独的 tones. 这 四
detectors 有 中心 发生率 这个 能 是 设置
通过 寄存器 udfd1–4 (看 表格 20). tdet (se5
(se8 = 0x02) 读 仅有的 定义) 能 是 监控,
表格 18. modem 结果 代号
Command 函数
一个 british 电信 caller id 空闲 声调
alert 发现
b busy 声调 发现
c 连接
d 连接 1200 bps (当 pro-
grammed 作 v.22bis modem)
f hookswitch flash 或者 电池 rever-
sal 发现
H modem automatically hanging 向上 在
日本 caller id 模式
I
在-hook intrusion 完成
(phone 后面的 在 hook)
i 在-hook intrusion 发现 (phone
止-hook 在 这 线条)
K sia 联系 id kissoff 声调
发现
L phone 线条 发现
l 非 phone 线条 发现
m caller id mark 信号 发现
N 非 运输车 发现
n 非 dial 声调 (时间-输出 设置 用 cw
(s02))
O modem ok 回馈
R 新当选的 环绕 信号 发现
r ringback 声调 发现
S resending sia 联系 id 数据
t dial 声调
v 连接 75 bps (v.23 仅有的)
x overcurrent 状态 发现 之后 一个
止-hook 事件
^ kissoff 声调 发现 必需的
, dialing 完全
表格 18. modem 结果 代号 (持续)